Press Release Source: UL Environment, Inc. On Monday March 29, 2010, 9:00 am EDT
NORTHBROOK, Ill., March 29 /PRNewswire/ -- UL Environment, Inc., a global leader in environmental evaluation and certification, today announced initiation of a collaborative effort to develop sustainability standards for indoor and outdoor lighting. These standards will assist consumers, designers, architects and building operators in identifying more sustainable options for interior and exterior light fixtures, LED modules and related lighting components. The standards will address entire luminaires, including reflector, aperture, outer shell and connection to a power source. The standards will be based on environmental assessment of a product's entire life cycle, from raw materials to manufacture, use and disposal.
"According to the U.S. Department of Energy, an average household dedicates 11 percent of its energy budget to lighting," said Stephen Wenc, president of UL Environment, Inc. "LED modules alone have potential to reduce lighting electricity demand in the U.S. by one third and deliver savings of $265 billion by 2027—but lighting solutions can go beyond energy and cost savings. This effort supports the development of more sustainable options for consumers based on a holistic evaluation of environmental performance in a variety of areas beyond efficiency."
UL Environment's sustainability standards will consider environmental elements such as energy efficiency and product materials, manufacturing process and recyclability. The standards will set minimum environmental requirements and create a progressive and tiered structure that makes it possible for manufacturers to highlight their sustainability achievements.
"Sustainability is a consideration of growing importance for lighting designers and engineers," said Terry McGowan, Director of Engineering for the American Lighting Association. "Companies have long embraced energy efficiency as an environmental benefit, but the industry has lacked guidance on how to develop and incorporate a truly sustainable option for lighting. This standards effort will go a long way towards defining the sustainability characteristics of our industry and all the industries that rely on lighting for operations."
Development of the standards will draw upon input from UL Environment's Standard Technical Panels (STPs) comprised of stakeholders such as manufacturers, government entities, non-governmental organizations and consumer interest groups.
This standards effort continues UL's lighting industry leadership, which includes the development and publication of LED Safety Standard UL 8750 in late 2009. UL Environment expects initial drafts of the lighting sustainability standards to be completed in 2010.
For more information, visit www.ulenvironment.com.
About UL Environment, Inc.
UL Environment (ULE) supports the growth and development of sustainable products and services in the global marketplace through standards development and independent third-party assessment and certification. ULE is a wholly owned subsidiary of Underwriters Laboratories, a global leader in conformity assessment that has been testing products and writing standards for more than a century. ULE currently offers Environmental Claims Validation (ECV), a service testing and verifying manufacturers' self-declared environmental claims, Sustainable Products Certification (SPC), a service testing and certifying products to accepted industry standards for environmental sustainability and Energy Efficiency Certification (EEC), a service testing and verifying product compliance with mandatory and voluntary energy efficiency regulations and programs. ULE is developing additional environmental standards, as well as training and advisory services to support organizations in the sustainable products and services industry.
Wednesday, March 31, 2010
Facebook | Solar Science Group.com: Solar Science Group™
Facebook | Solar Science Group.com: Solar Science Group™
Solar Science Group™ is a professional importer exporter of innovative solar PV solution for customers all around the world. Our mission is to make the world full of green energy. We are focusing on R&D, manufacture, installation, export and service of solar PV products. Energy is becoming more and more important for everyone. How to get safe, environmentally friendly and sustainable energy is the key issue for 21st century. Solar is a renewable and affordable solution and it will be one of the best choices for people and governments to support sustainable development. With strong technical capacity and rich experiences, we have established close cooperation relationships with a large number of overseas and domestic customers. Currently we mainly provide the products as below:
〇 solar PV panels,
〇 solar PV lighting system, such as Street lamps , yard lamp, scenic lamps and lawn lamps,
〇 solar generating system, including off-grid and grid-connected generating system, and its components such as inverter, controller, battery and bracket,
〇 BIPV. We are eager for creating value for customers all around the world, and our own strong passion and capacity make us indefatigable to do that.
Motivated by our corporate spirit of struggle, passion, wisdom and team, we have set our corporate mission, vision and core values, and worked out clear development strategy. We are running under an excellence-oriented all-around management system which is a perfect integration of marketing, brand building, R&D, innovation, production, service provision, QMS, OHSMS, EMS, financial management and HR management. The affiliate plant obtained the certificate ISO9001 QMS certificate issued by CQC, USA's No.1 certification organization, together with IQNet.
Our team and affiliates are young, vigorous and high quality, We have established internal-control quality standards for all of our main products, which are much stricter than IEC and ISO standards.The importance of Transparent Conductive Films (TCF)
Increasingly more and more flexible devices are required, from flexible displays for e-readers, OLEDs and other types to flexible photovoltaics and beyond.
These devices require a conductor to close the layers of active materials, but that conductor needs to be transparent in applications such as displays and photovoltaics to allow light through
. Today, transparent conductive oxides are widely used for rigid devices but these will become more expensive due to rare materials used, and are inadequate for most flexible electronics applications where they can easily crack under little strain. Alternatives are sought.
The main materials available for this purpose are:
〇* Transparent conductive oxides (TCOs)
〇* Organic materials, such as the most common PEDOT:PSS
〇* Carbon nanotubes (CNT) and graphene
Each have trade-offs between conductivity, transmittance, and flexibility. Each can be patterned in different ways. While sputtering will remain an important and high-volume technology for coating of rigid substrates like glass, solution-based processes including printing and the use of organic and nanoparticle materials have already gained a lot of traction and are expected to dominate the market for the flexible applications within a few years. Significant new developments are being made with both the materials used and how they can be deposited. This report addresses the performance of the different options and profiles organizations around the world that are developing better solutions.
Balance of system (BOS) Providers
Until recently the electronics used in PV systems – inverters and Balance of System (BOS) components have been an overlooked and underinvested part of the solar ecosystem.
However, balance of system components (cabling, combiner boxes, racks, and design and installation fees) account for a large percentage of an array’s per-watt cost – and represent a substantial opportunity for reduction in up-front expenditures.
At Solar Science Group we understand that the BOS components are essential support elements and need to be considered when developing PV installations. Solar Science Group works closely with our BOS partners to develop systems that can be easily adaptable to the specifics of the project and provide the greatest performance.
Until recently the electronics used in PV systems – inverters and Balance of System (BOS) components have been an overlooked and underinvested part of the solar ecosystem. However, balance of system components (cabling, combiner boxes, racks, and design and installation fees) account for a large percentage of an array’s per-watt cost – and represent a substantial opportunity for reduction in up-front expenditures. At Solar science group,we understand that the BOS components are essential support elements and need to be considered when developing PV installations.
Solar science group works closely with our BOS partners to develop systems that can be easily adaptable to the specifics of the project and provide the greatest performance.
Focusing on customer, persisting in improving and striving for excellence, that is all of our work. Choosing Solar scienc egroup inc™, it will be your right decision!If you share our enthusiasm for photovoltaics as a renewable form of energy and are interested in becoming a member of our innovative and performance-oriented team, then we would be pleased to receive your application. For students we offer the option of internships and thesis study programs.
Solar Science Group™ is a professional importer exporter of innovative solar PV solution for customers all around the world. Our mission is to make the world full of green energy. We are focusing on R&D, manufacture, installation, export and service of solar PV products. Energy is becoming more and more important for everyone. How to get safe, environmentally friendly and sustainable energy is the key issue for 21st century. Solar is a renewable and affordable solution and it will be one of the best choices for people and governments to support sustainable development. With strong technical capacity and rich experiences, we have established close cooperation relationships with a large number of overseas and domestic customers. Currently we mainly provide the products as below:
〇 solar PV panels,
〇 solar PV lighting system, such as Street lamps , yard lamp, scenic lamps and lawn lamps,
〇 solar generating system, including off-grid and grid-connected generating system, and its components such as inverter, controller, battery and bracket,
〇 BIPV. We are eager for creating value for customers all around the world, and our own strong passion and capacity make us indefatigable to do that.
Motivated by our corporate spirit of struggle, passion, wisdom and team, we have set our corporate mission, vision and core values, and worked out clear development strategy. We are running under an excellence-oriented all-around management system which is a perfect integration of marketing, brand building, R&D, innovation, production, service provision, QMS, OHSMS, EMS, financial management and HR management. The affiliate plant obtained the certificate ISO9001 QMS certificate issued by CQC, USA's No.1 certification organization, together with IQNet.
Our team and affiliates are young, vigorous and high quality, We have established internal-control quality standards for all of our main products, which are much stricter than IEC and ISO standards.The importance of Transparent Conductive Films (TCF)
Increasingly more and more flexible devices are required, from flexible displays for e-readers, OLEDs and other types to flexible photovoltaics and beyond.
These devices require a conductor to close the layers of active materials, but that conductor needs to be transparent in applications such as displays and photovoltaics to allow light through
. Today, transparent conductive oxides are widely used for rigid devices but these will become more expensive due to rare materials used, and are inadequate for most flexible electronics applications where they can easily crack under little strain. Alternatives are sought.
The main materials available for this purpose are:
〇* Transparent conductive oxides (TCOs)
〇* Organic materials, such as the most common PEDOT:PSS
〇* Carbon nanotubes (CNT) and graphene
Each have trade-offs between conductivity, transmittance, and flexibility. Each can be patterned in different ways. While sputtering will remain an important and high-volume technology for coating of rigid substrates like glass, solution-based processes including printing and the use of organic and nanoparticle materials have already gained a lot of traction and are expected to dominate the market for the flexible applications within a few years. Significant new developments are being made with both the materials used and how they can be deposited. This report addresses the performance of the different options and profiles organizations around the world that are developing better solutions.
Balance of system (BOS) Providers
Until recently the electronics used in PV systems – inverters and Balance of System (BOS) components have been an overlooked and underinvested part of the solar ecosystem.
However, balance of system components (cabling, combiner boxes, racks, and design and installation fees) account for a large percentage of an array’s per-watt cost – and represent a substantial opportunity for reduction in up-front expenditures.
At Solar Science Group we understand that the BOS components are essential support elements and need to be considered when developing PV installations. Solar Science Group works closely with our BOS partners to develop systems that can be easily adaptable to the specifics of the project and provide the greatest performance.
Until recently the electronics used in PV systems – inverters and Balance of System (BOS) components have been an overlooked and underinvested part of the solar ecosystem. However, balance of system components (cabling, combiner boxes, racks, and design and installation fees) account for a large percentage of an array’s per-watt cost – and represent a substantial opportunity for reduction in up-front expenditures. At Solar science group,we understand that the BOS components are essential support elements and need to be considered when developing PV installations.
Solar science group works closely with our BOS partners to develop systems that can be easily adaptable to the specifics of the project and provide the greatest performance.
Focusing on customer, persisting in improving and striving for excellence, that is all of our work. Choosing Solar scienc egroup inc™, it will be your right decision!If you share our enthusiasm for photovoltaics as a renewable form of energy and are interested in becoming a member of our innovative and performance-oriented team, then we would be pleased to receive your application. For students we offer the option of internships and thesis study programs.
Monday, March 29, 2010
Sunday, March 28, 2010
Have you seen this? I can't believe I almost missed this!
Okay... I'm going to give this to you straight and upfront.
I've got something CRAZY to share with you today :)
What if I told you there was a way to get traffic
for as little at .01 each would you believe it?
---------------------------------------------------
Well...the holy grail of cheap traffic has just
been discovered!
---------------------------------------------------
Underground marketer Kris Trujillo literally got
over 45,000 visitors and 9200 optin subscribers
to his squeeze page in just under 24 hours
IN THE SUPER COMPETITIVE DATING NICHE...
What's even more impressive is he got all those
people for just .07 each...HOW SWEET IS THAT!?
THIS ISN'T SOME HYPED UP NEW PROGRAM OR FAD THAT'S
GOING TO COME AND GO...THIS IS REAL AND IN YOUR FACE
AND IT'S GOING TO CHANGE THE GAME....PERMANENTLY! GO SEE FOR YOUR SELF
Imagine being able to go into virtually any niche
and start getting visitors right away for pennies
each....even in the super competitive niches such
as weight loss, dating, real estate and more...
You can build your subscriber list instantly and
start making money within a few hours of launching
your campaign....THAT'S AS POWERFUL AS IT GETS!..SEE IT LIVE
I have no idea how long this is going to be up or
if there's a limit on the number of courses they
are releasing...BUT DO YOU REALLY WANT TO TAKE A
CHANCE ON THAT?
I would drop what I'm doing and go signup immediately
before you get shut out and are never able to
discover Kris' secret formula for...
GETTING TRAFFIC FOR .01 EACH
GETTING INSTANT SUBSCRIBERS
MAKING INCREDIBLE CASH RIGHT AWAY
You'll become an "INSTANT ROCKSTAR" and you'll never
have to worry about getting traffic to your website
ever again.....GO HERE NOW=>
Sincerely,
AGEC
P.S. Remember, we're talking about instant traffic,
instant subscribers and almost instant cash within
hours of launching your campaign for just pennies
each....YOU WON'T FIND THIS ANYWHERE ELSE but here:)
[OMG] this guy is the PIED PIPPER of cheap internet traffic!!
Lets be honest here… In the last blog post I called this guy Kris the "Pied Pipper" of Internet traffic. Well… Over the last couple of days I have been watching his video course inside of the sneak peak members area here:
Unfortunately you won't be able to buy the course just yet. But give the guys over there a couple of days and everything will be ready.
Now… Let me tell you exactly why I think this guy is like the "Pied Pipper". After watching these videos I watched Kris set up a live and running campaign in LESS than 2 hours! Did you see the results for his efforts? SEE IT LIVE
The guy generated over 45,000 visitors to his website and he GRABBED 20% of them into an opt-in list. He basically played his magic flute and people did what he said… I WAS AMAZED.. I WAS SHOCKED… I WAS JEALOUS!…Correction… I AM JEALOUS!!
Can you imagine the possibilities if you could bring the masses into your website for pennies on the dollar and convert them into buying leads.
The most INCREDIBLE part is how he did it all… I don't know why I didn't think of this before.
He does have a couple of cheats though… two tools that really helped him create the campaigns in LIGHTNING SPEED. The URL scraper alone SAVED him HOURS of boring tedious work. Then he has a whole slew of templates that he can pick from. He really has done the necessary work in order to save time. And we all know that in this business TIME IS MONEY.
Check out the "proof" video he created. What you see in this video is from the work he did in the members area… THATS RIGHT… He takes members of this course through a real live case study… Unscripted… Edited only to cut out periods of silence… Then he places his FREAKISHLY AMAZING results for the world to see. Only allowing people inside of the course to gain the real knowledge in how he did it.
Check this out I guarantee you'll NEVER forget it.... (clickHERE
==>>
Did you skip over that link so you could keep reading this boring email?
I urge you to stop reading and watch the video now…
I promise you won't regret a thing!SEE IT ALL HERE
See you on the other side.
AGEC
Saturday, March 27, 2010
Weird 9179 subscribers, 45,000 visitors, $0.07 spent!!...
Ok so you have tried most paid marketing platforms such as ppc marketing adwords, media buying and what not. The affiliate marketer’s tool box for promotions is ever growing resulting in mass confusion. You will find more and more wannabe Gurus advocate the next best thing since sliced bread when it comes to making a quick buck online. If you've got more SEO tools than money coming in, it’s time to take a look at your marketing strategies and pay close attention.
Years ago adwords was king with most internet marketers trying to master adwords to make a killing in their niche. Some very smart marketers have made millions using PPC and adwords, Perry Marshall being the classic example.
The problem I see daily is that unless you know what you are doing with paid ppc you will see your campaign budget literally disappear overnight.
There is a science to adwords that not many people can master in a short period of time. Especially newbie’s who are setting up campaigns left right and centre.
With the hefty cost per clicks involved in any adwords campaign you need to be looking at the ROI you are getting for your troubles and money invested. The trouble here is keeping up with Google’s changing algorithms, constantly being slapped and sent to implement black hat underground techniques, which don’t work in the long run.
Yahoo MSN and Bing are following the trend. Although it's been said that MSN and Yahoo have great conversion rates. There is a better way of getting fast targeted results.
What if you knew of a secret marketing strategy that allowed you to buy traffic at insanely low prices? I’m talking cents here and not $10 dollars a click.
The Internet marketing industry is becoming more a more aggressive with thousands of people joining the online community every single day, backed by wannabe gurus who are teaching them that they can make quick money online. Leaving them out in the cold while they rake in 6 figure commission checks in their sleep.
Forget the Buzzword make money fast. The New Buzzword is Mass PPV at wholesale prices.
You can make money fast if you know the secret marketing techniques used by the real Gurus in the know, quite frankly you will not hear about their secret techniques that they use to rake in thousands of dollars a month. signup for our news letter to get the full story free or go to
Years ago adwords was king with most internet marketers trying to master adwords to make a killing in their niche. Some very smart marketers have made millions using PPC and adwords, Perry Marshall being the classic example.
The problem I see daily is that unless you know what you are doing with paid ppc you will see your campaign budget literally disappear overnight.
There is a science to adwords that not many people can master in a short period of time. Especially newbie’s who are setting up campaigns left right and centre.
With the hefty cost per clicks involved in any adwords campaign you need to be looking at the ROI you are getting for your troubles and money invested. The trouble here is keeping up with Google’s changing algorithms, constantly being slapped and sent to implement black hat underground techniques, which don’t work in the long run.
Yahoo MSN and Bing are following the trend. Although it's been said that MSN and Yahoo have great conversion rates. There is a better way of getting fast targeted results.
What if you knew of a secret marketing strategy that allowed you to buy traffic at insanely low prices? I’m talking cents here and not $10 dollars a click.
The Internet marketing industry is becoming more a more aggressive with thousands of people joining the online community every single day, backed by wannabe gurus who are teaching them that they can make quick money online. Leaving them out in the cold while they rake in 6 figure commission checks in their sleep.
Forget the Buzzword make money fast. The New Buzzword is Mass PPV at wholesale prices.
You can make money fast if you know the secret marketing techniques used by the real Gurus in the know, quite frankly you will not hear about their secret techniques that they use to rake in thousands of dollars a month. signup for our news letter to get the full story free or go to
LED lighting financing
LED lighting financing
Financing
Financing
Leasing Lighting Equipment
Are you a concert touring and lighting company who just landed the HUGE concert tour of the summer?
Need to finance the latest in automated lighting, stage lighting, fog machines, follow spots, studio lighting and more?
WB Financial is home to the most complete lighting equipment leasing options available in the US and Canada.
WB Financial is able to provide the equipment financing our clients need to grow their business.
Contact your Financial account manager to see how we can help your business:
WB is an industry leader in lighting equipment leasing; allow us to structure an equipment financing package to meet your needs today. "Distinctively Different Business Finance" |
American Green Energy Council ATG LED Lighting ambassadors affiliate program,
American Green Energy Council ATG LED Lighting ambassadors affiliate program,
Become an Affiliate
| Welcome to the American Green Energy Council ATG LED Lighting affiliate ambassadors program,The fastest growing force for clean Lighting on the planet!, and a excellent way to take part in clean lighting and generate revenue with your affiliation with us.Once signed up , our affiliate manager will contact you to provide the media kits that come with the program.Also 100 free company Leads We do all the work! American Green Energy Council ATG LED Lighting will provide you with all the ambassadors PDF file's ,Media kits,and website links you need to be able to track the sales you originate. Simply copy and paste the code we supply into your website. With an easy to use interface, you will get notification immediately an order has been approved. Create your account and move forward with the Ambassadors Affiliate program today! |
Over 16 Billion Dollars of Electricity is unusable energy, but billable in the U.S." - US Department of Energy
Stops with this ...Save up to 25% On your Commercial/Industrial Electric Bills! The Power 3200 Reduces the Amount of Inductive Load in Commercial and Industrial Environments
Power-3400 The Many Benefits of the Power- 3200 Include:
--> Lowers electric bills up to 25%!
--> Reduces electricity required by inductive loads (motors)!
--> Enhances capacity of existing electrical system!
--> Eliminates harmful power surges!
--> Protects appliances and sensitive electronic equipment!
--> Reduces harmful effects caused by electrical noise!
--> Power Factor Optimization! click here
--> Lowers electric bills up to 25%!
--> Reduces electricity required by inductive loads (motors)!
--> Enhances capacity of existing electrical system!
--> Eliminates harmful power surges!
--> Protects appliances and sensitive electronic equipment!
--> Reduces harmful effects caused by electrical noise!
--> Power Factor Optimization! click here
Over 16 Billion Dollars of Electricity is unusable energy, but billable in the U.S."
- US Department of Energy.Save up to 25% On your Commercial/Industrial Electric Bills!
- US Department of Energy.Save up to 25% On your Commercial/Industrial Electric Bills!
LED NEWS AND SPECS
RX Series LED Lamps, are dimmable retrofit solutions for incandescent lamps and CFL lamps.
The dimmable function enables saving energy to be so easy, which makes eLucent™ RX Series warmly-welcomed by home, retail, commercial, and hospitality applications.
The large aluminum housing is the perfect shape for optimal heat dissipation and ensures long life-span.
eLucent™ R30X is equivalent up to a 75 watt incandescent, and eLucent™ R38X is equivalent up to a 100 watt incandescent, but uses up to 90% less energy and lasts up to 50 times longer.
eLucent™ RX Series contain no hazardous substances (e.g. lead, mercury), totally pollution and poisoning free.
Technical Specifications:
LED Qty: 7LEDs or 12LEDs
Input Voltage: 120/240VAC
Lumens: 550~600 lm or 950~1100 lm
Power Consumption: 9W or 15.8W
CRI: >75
Dimension: D95*H105 mm or D122*H130 mm
Base: E27
Housing: Aluminum
Part Numbers:
HSL-PX07N-302200-H1
HSL-PX07N-302200-H2
HSL-PX12N-382200-H1
HSL-PX12N-382200-H2
Features & Benefits:
Dimmable on all standard commercial dimmers;
Ultra energy efficient, up to 90% energy-saving;
Optimal heat dissipation with special-designed aluminum housing;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for home, retail, commercial, and hospitality applications.
eLucent E70X LED Globe Bulb
HBX-2101N-070000-H0 eLucent E70X LED Globe Bulbs, 10LEDs*1W, Natural White, E27, 120VAC/240VAC ......$47.90 replacement for 110 watt bulb
Unmatched Performance, Incomparable Value.
ATG LED Lighting offers the best price/performance ratio in the industry. Very simply you will not find another LED lighting product that offers the same combination of performance and value as the ATG LED lighting eLucent E70X. Here is a small example of how much you could save by switching just one incandescent to a ATG LED lighting eLucent E70X.
The dimmable function enables saving energy to be so easy, which makes eLucent™ RX Series warmly-welcomed by home, retail, commercial, and hospitality applications.
The large aluminum housing is the perfect shape for optimal heat dissipation and ensures long life-span.
eLucent™ R30X is equivalent up to a 75 watt incandescent, and eLucent™ R38X is equivalent up to a 100 watt incandescent, but uses up to 90% less energy and lasts up to 50 times longer.
eLucent™ RX Series contain no hazardous substances (e.g. lead, mercury), totally pollution and poisoning free.
Technical Specifications:
LED Qty: 7LEDs or 12LEDs
Input Voltage: 120/240VAC
Lumens: 550~600 lm or 950~1100 lm
Power Consumption: 9W or 15.8W
CRI: >75
Dimension: D95*H105 mm or D122*H130 mm
Base: E27
Housing: Aluminum
Part Numbers:
HSL-PX07N-302200-H1
HSL-PX07N-302200-H2
HSL-PX12N-382200-H1
HSL-PX12N-382200-H2
Features & Benefits:
Dimmable on all standard commercial dimmers;
Ultra energy efficient, up to 90% energy-saving;
Optimal heat dissipation with special-designed aluminum housing;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for home, retail, commercial, and hospitality applications.
eLucent E70X LED Globe Bulb
HBX-2101N-070000-H0 eLucent E70X LED Globe Bulbs, 10LEDs*1W, Natural White, E27, 120VAC/240VAC ......$47.90 replacement for 110 watt bulb
Unmatched Performance, Incomparable Value.
ATG LED Lighting offers the best price/performance ratio in the industry. Very simply you will not find another LED lighting product that offers the same combination of performance and value as the ATG LED lighting eLucent E70X. Here is a small example of how much you could save by switching just one incandescent to a ATG LED lighting eLucent E70X.
110 watt LED replacement
E70X XPower LED Globe Bulb, with E27 edison base, is fully-qualified retrofit solution to replace incandescent lamps and CFL lamps. It is well-suited for use in your home, commercial, retail or hospitality areas.
eLucent™ E70X adopts high-efficacy LEDs, emits equivalent lumen output to 80-100 watt incandescent lamps while only using 10 watt. Specially designed aluminum housing provides excellent heat dissipation and ensures it to service for 50,000 hours.
eLucent™ E70X contains no lead, no mercury, totally pollution and poisoning free.
Features & Benefits:
Ultra energy efficient, replacing up to 80-100W incandescent lamps;
Good heat dissipation with professional designed aluminum alloy housing;
Anti-glare, giving visual comfort with unique integrated PC cover;
Isolating circuit design, safety and reliability;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with PC cover and durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for homes, restaurants, hotels, malls etc.
eLucent™ E70X adopts high-efficacy LEDs, emits equivalent lumen output to 80-100 watt incandescent lamps while only using 10 watt. Specially designed aluminum housing provides excellent heat dissipation and ensures it to service for 50,000 hours.
eLucent™ E70X contains no lead, no mercury, totally pollution and poisoning free.
Features & Benefits:
Ultra energy efficient, replacing up to 80-100W incandescent lamps;
Good heat dissipation with professional designed aluminum alloy housing;
Anti-glare, giving visual comfort with unique integrated PC cover;
Isolating circuit design, safety and reliability;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with PC cover and durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for homes, restaurants, hotels, malls etc.
Our LED 100 watt replacement
From
$0.60 Federal Tax Deduction per Square Foot!
Bring a 75% Energy Savings and a (starts from)$0.20 to$.60 per sq. ft, AVG-Federal Tax deduction to American businesses, conserving more & improving quality of our workplaces and Natural Environment, with SMD LED Tube Lighting!
Our LED Tubes save a combined total of 75% or more, with a savings for both the Tube and the Ballast. An equivalent of 45% is saved, compared to standard Fluorescent lighting, with the SMD LED Tubes alone.
The Energy Policy Act of 2005 included a new tax incentive, to improve the energy efficiency of commercial buildings. The "Commercial Building Tax Deduction" establishes a tax deduction for expenses incurred for energy efficient building expenditures made by a building owner.
* Buildings that save at least 50 percent of projected annual energy costs across all three system components are eligible for a tax deduction of $1.80 per square foot.
** Buildings that save a specified percentage of projected annual energy costs for one of the three components – building envelope (10 percent whole building energy savings), lighting (20 percent), or heating and cooling (20 percent) – are eligible for a $0.60 per square foot deduction.
*** For lighting improvements that reduce lighting use by 25-40 percent and also employ dual switching (ability to switch roughly half the lights off and still have fairly uniform light distribution), the $0.60 per square foot may be prorated, ranging from $0.30 per square foot for 25 percent lighting energy savings to $0.60 per square foot for 40 percent savings.
The Emergency Economic Stabilization Act of 2008 (HR-1424), approved and signed on October 3, 2008, extends the benefits of the Energy Policy Act of 2005 through December 31, 2013.
Improve Lighting Systems:
Improving your lighting systems is one of the first steps EPA recommends to increase the efficiency of your buildings whether you are retrofitting existing buildings or designing new buildings. This is not only because lighting upgrades are so cost effective, but also because less heat is generated from efficient lighting systems, affecting the proper sizing of more capital-intensive heating and cooling systems. As outlined in the ENERGY STAR Building Upgrade Manual, a strategy that combines efficient lighting technologies, controls, and appropriate light levels is the most effective approach to meeting energy efficiency goals, including those required to qualify for the partial tax deduction. Read the Lighting Section, helpful information for lighting, don't forget to jump ahead of the curve, be a forward leaning, lean and mean energy machine, update to our state-of-the-art SMD LED Tubes and save 75% over standard Fluorescent Tubes.
You may qualify for a deduction of $0.60 per square foot if the lighting system employs dual switching (ability to switch roughly half the lights off and still have fairly uniform light distribution) and reduces installed lighting power by at least 25% from values specified in specific cited tables in ASHRAE Standard 90.1-2001. As lighting power reductions climb from 25% to 40%, the deduction is increased proportionally, up to $0.60 for a 40% power reduction (plus the dual switching).
For a typical building, a lighting power reduction of 40% increases the building’s ENERGY STAR rating by about 10 points.
Lighting consumes close to 35 percent of the electricity used in commercial buildings in the United States and affects other building systems through its electrical requirements and the waste heat that it produces. Upgrading lighting systems with efficient light sources, fixtures, and controls can reduce lighting energy use, improve the visual environment, and affect the
sizing of HVAC and electrical systems.
CONSULT A TAX PROFESSIONAL
Confirm with your Tax Professional and take a (FROM)$.20to $0.60 per square foot deduction for improved lighting efficiency of 40% (with at switch that can turn off one/half of the lighting on command).
Only a tax attorney or other related professional can provide tax advice.
Q. What if my project cost exceeds the cap of $0.60/sq. ft.? How is the remaining cost treated tax-wise?
A. The remaining costs can be depreciated and claimed normally. So a qualifying project in a 100,000-sq.ft. building with a cost of $100,000 and 40% lighting power density savings could be eligible to deduct $60,000 in the taxable year the lighting is placed in service. The remaining $40,000 could then be claimed normally (i.e., capitalized and depreciated).
Q. What if a commercial building tenant performs a retrofit that would meet the energy savings, would they get the deduction?
A. Unfortunately, as in many matters of tax law, the answer is not necessarily clear. The person who gets the Commercial Buildings Deduction is the person who owns the property for tax purposes.
Although in many, if not most instances, a tenant improvement will revert to the landlord at the end of a lease, the property is not necessarily owned by the landlord for tax purposes. It is a question of fact, and the determination depends on the arrangements between the parties. If the tenant pays for the investment, constructs it according to its own specifications, and there are no concessions in the lease or from the landlord, it is likely that the tenant will be the owner of the improvements for tax purposes and eligible to claim the Commercial Buildings Deduction.
Fortunately, this is a question that arose under the tax law before the enactment of the Commercial Buildings Deduction provision. In the case of tenant improvements, the tenant and landlord would have to determine who the tax owner is for purposes of claiming depreciation deductions in any event. The Commercial Buildings Deduction does not change that determination. The Commercial Buildings Deduction simply provides a more beneficial deduction that that normally provided by depreciation. Perhaps a tenant should come to an agreement, in advance, with the landlord about who get the deduction, or how it is to be shared, consult your tax professional.
The analysis is the same regarding improvements in government buildings. If the contractor is the owner for tax purposes, it can claim the Commercial Buildings Deduction. Whether a private person can be an owner of property with respect to a government building under the applicable local law is a factor that would have to be taken into account in determining who the owner is for tax purposes.
Sources -
Commercial Tax Incentives - http://www.energystar.gov/ia/business/comm_bldg_tax_incentives.pdf
Lighting and People - http://www.energystar.gov/ia/business/EPA_BUM_CH6_Lighting.pdf
Commercial Lighting Tax Deductions - http://www.lightingtaxdeduction.org/
IRS Deduction for Energy Efficient Commercial Buildings - http://www.efficientbuildings.org/PDFs/n-08-40.pdf
Qualified Software to Calc. Comm. Building Tax Deductions http://www1.eere.energy.gov/buildings/qualified_software.html
Tax Incentives for Commercial Buildings http://www1.eere.energy.gov/buildings/tax_commercial.html
Federal Tax Incentives. Home and Business http://www.mi.gov/documents/dleg/FAQs_Federal_Tax_Credits_256153_7.pdf
Business Tax Incentives http://energytaxincentives.org/business/commercial_buildings.php
$0.60 Federal Tax Deduction per Square Foot!
Bring a 75% Energy Savings and a (starts from)$0.20 to$.60 per sq. ft, AVG-Federal Tax deduction to American businesses, conserving more & improving quality of our workplaces and Natural Environment, with SMD LED Tube Lighting!
Our LED Tubes save a combined total of 75% or more, with a savings for both the Tube and the Ballast. An equivalent of 45% is saved, compared to standard Fluorescent lighting, with the SMD LED Tubes alone.
The Energy Policy Act of 2005 included a new tax incentive, to improve the energy efficiency of commercial buildings. The "Commercial Building Tax Deduction" establishes a tax deduction for expenses incurred for energy efficient building expenditures made by a building owner.
* Buildings that save at least 50 percent of projected annual energy costs across all three system components are eligible for a tax deduction of $1.80 per square foot.
** Buildings that save a specified percentage of projected annual energy costs for one of the three components – building envelope (10 percent whole building energy savings), lighting (20 percent), or heating and cooling (20 percent) – are eligible for a $0.60 per square foot deduction.
*** For lighting improvements that reduce lighting use by 25-40 percent and also employ dual switching (ability to switch roughly half the lights off and still have fairly uniform light distribution), the $0.60 per square foot may be prorated, ranging from $0.30 per square foot for 25 percent lighting energy savings to $0.60 per square foot for 40 percent savings.
The Emergency Economic Stabilization Act of 2008 (HR-1424), approved and signed on October 3, 2008, extends the benefits of the Energy Policy Act of 2005 through December 31, 2013.
Improve Lighting Systems:
Improving your lighting systems is one of the first steps EPA recommends to increase the efficiency of your buildings whether you are retrofitting existing buildings or designing new buildings. This is not only because lighting upgrades are so cost effective, but also because less heat is generated from efficient lighting systems, affecting the proper sizing of more capital-intensive heating and cooling systems. As outlined in the ENERGY STAR Building Upgrade Manual, a strategy that combines efficient lighting technologies, controls, and appropriate light levels is the most effective approach to meeting energy efficiency goals, including those required to qualify for the partial tax deduction. Read the Lighting Section, helpful information for lighting, don't forget to jump ahead of the curve, be a forward leaning, lean and mean energy machine, update to our state-of-the-art SMD LED Tubes and save 75% over standard Fluorescent Tubes.
You may qualify for a deduction of $0.60 per square foot if the lighting system employs dual switching (ability to switch roughly half the lights off and still have fairly uniform light distribution) and reduces installed lighting power by at least 25% from values specified in specific cited tables in ASHRAE Standard 90.1-2001. As lighting power reductions climb from 25% to 40%, the deduction is increased proportionally, up to $0.60 for a 40% power reduction (plus the dual switching).
For a typical building, a lighting power reduction of 40% increases the building’s ENERGY STAR rating by about 10 points.
Lighting consumes close to 35 percent of the electricity used in commercial buildings in the United States and affects other building systems through its electrical requirements and the waste heat that it produces. Upgrading lighting systems with efficient light sources, fixtures, and controls can reduce lighting energy use, improve the visual environment, and affect the
sizing of HVAC and electrical systems.
CONSULT A TAX PROFESSIONAL
Confirm with your Tax Professional and take a (FROM)$.20to $0.60 per square foot deduction for improved lighting efficiency of 40% (with at switch that can turn off one/half of the lighting on command).
Only a tax attorney or other related professional can provide tax advice.
Q. What if my project cost exceeds the cap of $0.60/sq. ft.? How is the remaining cost treated tax-wise?
A. The remaining costs can be depreciated and claimed normally. So a qualifying project in a 100,000-sq.ft. building with a cost of $100,000 and 40% lighting power density savings could be eligible to deduct $60,000 in the taxable year the lighting is placed in service. The remaining $40,000 could then be claimed normally (i.e., capitalized and depreciated).
Q. What if a commercial building tenant performs a retrofit that would meet the energy savings, would they get the deduction?
A. Unfortunately, as in many matters of tax law, the answer is not necessarily clear. The person who gets the Commercial Buildings Deduction is the person who owns the property for tax purposes.
Although in many, if not most instances, a tenant improvement will revert to the landlord at the end of a lease, the property is not necessarily owned by the landlord for tax purposes. It is a question of fact, and the determination depends on the arrangements between the parties. If the tenant pays for the investment, constructs it according to its own specifications, and there are no concessions in the lease or from the landlord, it is likely that the tenant will be the owner of the improvements for tax purposes and eligible to claim the Commercial Buildings Deduction.
Fortunately, this is a question that arose under the tax law before the enactment of the Commercial Buildings Deduction provision. In the case of tenant improvements, the tenant and landlord would have to determine who the tax owner is for purposes of claiming depreciation deductions in any event. The Commercial Buildings Deduction does not change that determination. The Commercial Buildings Deduction simply provides a more beneficial deduction that that normally provided by depreciation. Perhaps a tenant should come to an agreement, in advance, with the landlord about who get the deduction, or how it is to be shared, consult your tax professional.
The analysis is the same regarding improvements in government buildings. If the contractor is the owner for tax purposes, it can claim the Commercial Buildings Deduction. Whether a private person can be an owner of property with respect to a government building under the applicable local law is a factor that would have to be taken into account in determining who the owner is for tax purposes.
Sources -
Commercial Tax Incentives - http://www.energystar.gov/
Lighting and People - http://www.energystar.gov/
Commercial Lighting Tax Deductions - http://www.lightingtaxdedu
IRS Deduction for Energy Efficient Commercial Buildings - http://www.efficientbuildi
Qualified Software to Calc. Comm. Building Tax Deductions http://www1.eere.energy.go
Tax Incentives for Commercial Buildings http://www1.eere.energy.go
Federal Tax Incentives. Home and Business http://www.mi.gov/document
Business Tax Incentives http://energytaxincentives
ATG LED Lighting Electronics donated their i Bright™ T8 SMD LED Tubes to Evergreen Community Charter School.
The school installed i Bright™ LED to replace the conventional fluorescents. The retrofit installation is a great success from the feedback and test results listed below: Main installation is in the tutoring classroom.
Additional installation is in the main office visiting area.
Before retrofitting, the staffs were always complains of constant headaches from the overhead fluorescent s.
And now they love the LED's and have no headaches or eye strain. The school also did some tests to make comparison between i Bright LED and conventional fluorescents.
The tests were implemented as below:
1) Energy Saving Direct draw readings were taken at the switch leg for a total energy use number in the tutoring classroom. The fluorescent s were an average draw of 36.6 watts per lamp, and 16.8 watts per lamp for the LED's. For what it’s worth, these energy savings earned the school a great rebate, cash in pocket to use however they want.
2) Luminous Intensity Luminous intensity was tested by stationary light level readings. The average reading for the fluorescent s was 14.08 cd, and for the LED was 14.60 cd. About i Bright™ T8s iBright™ T8s LED Tubes are the next generation solution to replace conventional fluorescent light.
They feature higher efficiency, more reliability compared to the common LED fluorescent lights on the market.
With patented thermal control technology, and special designed aluminum housing, iBright™ T8s substantially achieves good thermal property and plays more stable performance and of course will last up to 50,000 hours compared to 5,000 hours from conventional fluorescent lights.
iBright™ T8s is patented product; and the original chip and phosphor coating adopted for LEDs are both patented.
Features & Benefits: -Patented product; -CE approved and RoHS compliant; -High quality SMD LEDs, of high efficacy (typical 90lm/w); -Great light quality and great heat dissipation; -High reliability; -Low maintenance cost;
-Easy installation with no ballast & starter needed; -Energy saving with low power consumption; -Green and eco-friendly lighting source without mercury.
The school installed i Bright™ LED to replace the conventional fluorescents. The retrofit installation is a great success from the feedback and test results listed below: Main installation is in the tutoring classroom.
Additional installation is in the main office visiting area.
Before retrofitting, the staffs were always complains of constant headaches from the overhead fluorescent s.
And now they love the LED's and have no headaches or eye strain. The school also did some tests to make comparison between i Bright LED and conventional fluorescents.
The tests were implemented as below:
1) Energy Saving Direct draw readings were taken at the switch leg for a total energy use number in the tutoring classroom. The fluorescent s were an average draw of 36.6 watts per lamp, and 16.8 watts per lamp for the LED's. For what it’s worth, these energy savings earned the school a great rebate, cash in pocket to use however they want.
2) Luminous Intensity Luminous intensity was tested by stationary light level readings. The average reading for the fluorescent s was 14.08 cd, and for the LED was 14.60 cd. About i Bright™ T8s iBright™ T8s LED Tubes are the next generation solution to replace conventional fluorescent light.
They feature higher efficiency, more reliability compared to the common LED fluorescent lights on the market.
With patented thermal control technology, and special designed aluminum housing, iBright™ T8s substantially achieves good thermal property and plays more stable performance and of course will last up to 50,000 hours compared to 5,000 hours from conventional fluorescent lights.
iBright™ T8s is patented product; and the original chip and phosphor coating adopted for LEDs are both patented.
Features & Benefits: -Patented product; -CE approved and RoHS compliant; -High quality SMD LEDs, of high efficacy (typical 90lm/w); -Great light quality and great heat dissipation; -High reliability; -Low maintenance cost;
-Easy installation with no ballast & starter needed; -Energy saving with low power consumption; -Green and eco-friendly lighting source without mercury.
i Bright LED and conventional fluorescents.
100 WATT LED REPLACEMENT
RX Series LED Lamps, are dimmable retrofit solutions for incandescent lamps and CFL lamps.
The dimmable function enables saving energy to be so easy, which makes eLucent™ RX Series warmly-welcomed by home, retail, commercial, and hospitality applications.
The large aluminum housing is the perfect shape for optimal heat dissipation and ensures long life-span.
eLucent™ R30X is equivalent up to a 75 watt incandescent, and eLucent™ R38X is equivalent up to a 100 watt incandescent, but uses up to 90% less energy and lasts up to 50 times longer.
eLucent™ RX Series contain no hazardous substances (e.g. lead, mercury), totally pollution and poisoning free.
Technical Specifications:
LED Qty: 7LEDs or 12LEDs
Input Voltage: 120/240VAC
Lumens: 550~600 lm or 950~1100 lm
Power Consumption: 9W or 15.8W
CRI: >75
Dimension: D95*H105 mm or D122*H130 mm
Base: E27
Housing: Aluminum
Part Numbers:
HSL-PX07N-302200-H1
HSL-PX07N-302200-H2
HSL-PX12N-382200-H1
HSL-PX12N-382200-H2
Features & Benefits:
Dimmable on all standard commercial dimmers;
Ultra energy efficient, up to 90% energy-saving;
Optimal heat dissipation with special-designed aluminum housing;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for home, retail, commercial, and hospitality applications.
eLucent E70X LED Globe Bulb
HBX-2101N-070000-H0 eLucent E70X LED Globe Bulbs, 10LEDs*1W, Natural White, E27, 120VAC/240VAC ......$47.90 replacement for 110 watt bulb
Unmatched Performance, Incomparable Value.
ATG LED Lighting offers the best price/performance ratio in the industry. Very simply you will not find another LED lighting product that offers the same combination of performance and value as the ATG LED lighting eLucent E70X. Here is a small example of how much you could save by switching just one incandescent to a ATG LED lighting eLucent E70X.
The dimmable function enables saving energy to be so easy, which makes eLucent™ RX Series warmly-welcomed by home, retail, commercial, and hospitality applications.
The large aluminum housing is the perfect shape for optimal heat dissipation and ensures long life-span.
eLucent™ R30X is equivalent up to a 75 watt incandescent, and eLucent™ R38X is equivalent up to a 100 watt incandescent, but uses up to 90% less energy and lasts up to 50 times longer.
eLucent™ RX Series contain no hazardous substances (e.g. lead, mercury), totally pollution and poisoning free.
Technical Specifications:
LED Qty: 7LEDs or 12LEDs
Input Voltage: 120/240VAC
Lumens: 550~600 lm or 950~1100 lm
Power Consumption: 9W or 15.8W
CRI: >75
Dimension: D95*H105 mm or D122*H130 mm
Base: E27
Housing: Aluminum
Part Numbers:
HSL-PX07N-302200-H1
HSL-PX07N-302200-H2
HSL-PX12N-382200-H1
HSL-PX12N-382200-H2
Features & Benefits:
Dimmable on all standard commercial dimmers;
Ultra energy efficient, up to 90% energy-saving;
Optimal heat dissipation with special-designed aluminum housing;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.
Recommended Applications:
General and down lighting for home, retail, commercial, and hospitality applications.
eLucent E70X LED Globe Bulb
HBX-2101N-070000-H0 eLucent E70X LED Globe Bulbs, 10LEDs*1W, Natural White, E27, 120VAC/240VAC ......$47.90 replacement for 110 watt bulb
Unmatched Performance, Incomparable Value.
ATG LED Lighting offers the best price/performance ratio in the industry. Very simply you will not find another LED lighting product that offers the same combination of performance and value as the ATG LED lighting eLucent E70X. Here is a small example of how much you could save by switching just one incandescent to a ATG LED lighting eLucent E70X.
Over 16 Billion Dollars of Electricity is unusable energy, but billable in the U.S." - US Department of Energy
Over 16 Billion Dollars of Electricity is unusable energy, but billable in the U.S." - US Department of Energy
Stops with this ...Save up to 25% On your Commercial/Industrial Electric Bills! The Power 3200 Reduces the Amount of Inductive Load in Commercial and Industrial Environments
Power-3400 The Many Benefits of the Power- 3200 Include:
--> Lowers electric bills up to 25%!
--> Reduces electricity required by inductive loads (motors)!
--> Enhances capacity of existing electrical system!
--> Eliminates harmful power surges!
--> Protects appliances and sensitive electronic equipment!
--> Reduces harmful effects caused by electrical noise!
--> Power Factor Optimization!
visit...
Power-3400 The Many Benefits of the Power- 3200 Include:
--> Lowers electric bills up to 25%!
--> Reduces electricity required by inductive loads (motors)!
--> Enhances capacity of existing electrical system!
--> Eliminates harmful power surges!
--> Protects appliances and sensitive electronic equipment!
--> Reduces harmful effects caused by electrical noise!
--> Power Factor Optimization!
visit...
Over 16 Billion Dollars of Electricity is unusable energy, but billable in the U.S."
- US Department of Energy.Save up to 25% On your Commercial/Industrial Electric Bills!
- US Department of Energy.Save up to 25% On your Commercial/Industrial Electric Bills!
: What customers really want from you
What customers really want from you
The American green energy councils affiliate program" reveals all the Know how. And right now you can sign up...absolutely free!
Inside this valuable program, you will learn:
* How to "Master"clean lighting's.. every selling moment
* Easy ways to generate more leads
* Techniques for becoming a better clean lighting sales person
* What customers really want from you
* How to capitalize on your existing customers (and still have them love you)
* And so much more!
This affiliate program is a powerhouse of information! Information that will grow your company quickly and profitably. The same techniques and tactics in this affiliate program have been used by hundreds of companies to easily double, and even triple their current sales. The affiliate program is free, but could be worth thousands, or even millions to your bottom line!
Take the time to sign up today, and see what it can do for you and your business!
Sincerely,
American Green Energy Council
"the force behind clean lighting"
http://www.americangreenenergycouncil.org
P.S. This affiliate program will only be offered for a limited time. Don't delay, sign up now and start filling your bank account with all that extra income!...going green offers
Inside this valuable program, you will learn:
* How to "Master"clean lighting's.. every selling moment
* Easy ways to generate more leads
* Techniques for becoming a better clean lighting sales person
* What customers really want from you
* How to capitalize on your existing customers (and still have them love you)
* And so much more!
This affiliate program is a powerhouse of information! Information that will grow your company quickly and profitably. The same techniques and tactics in this affiliate program have been used by hundreds of companies to easily double, and even triple their current sales. The affiliate program is free, but could be worth thousands, or even millions to your bottom line!
Take the time to sign up today, and see what it can do for you and your business!
Sincerely,
American Green Energy Council
"the force behind clean lighting"
http://www.americangreenen
P.S. This affiliate program will only be offered for a limited time. Don't delay, sign up now and start filling your bank account with all that extra income!...going green offers
Facebook | Solarsciencegroup Led Lighting: High-Brightness LEDs: Input Voltage and Forward Voltage
Facebook | Solarsciencegroup Led Lighting: High-Brightness LEDs: Input Voltage and Forward Voltage
Sources of input voltage for LED arrays come from batteries or
power supplies that have a certain tolerance. An automotive
battery, for example, may supply 8V to 16V depending on the load
and the age of the battery. The "silver box" power supply inside a
desktop CPU may supply 12V ±10%.
High-brightness (HB) LEDs also give a range of forward voltage.
A typical HB LED might be characterized at a forward current
of 350 mA. The forward voltage of the LED when IF = 350 mA is
specified with a range that includes a typical value as well as
over-temperature maximum and minimum values. To ensure that
a true constant current is delivered to each LED in an array, the
power topology must be able to deliver an output voltage equal
to the sum of the maximum forward voltages of every device
placed in the string.
Manufacturers bin their devices for color, brightness, and
forward voltage. Binning for all three characteristics is
expensive, and forward voltage is often the specification that
is allowed to vary the most. Adding this to the shift in forward
voltage as the LED die temperature changes gives rise to the
need for constant-current regulators that have a wide range of
output voltage.
Constant
Sources of input voltage for LED arrays come from batteries or
power supplies that have a certain tolerance. An automotive
battery, for example, may supply 8V to 16V depending on the load
and the age of the battery. The "silver box" power supply inside a
desktop CPU may supply 12V ±10%.
High-brightness (HB) LEDs also give a range of forward voltage.
A typical HB LED might be characterized at a forward current
of 350 mA. The forward voltage of the LED when IF = 350 mA is
specified with a range that includes a typical value as well as
over-temperature maximum and minimum values. To ensure that
a true constant current is delivered to each LED in an array, the
power topology must be able to deliver an output voltage equal
to the sum of the maximum forward voltages of every device
placed in the string.
Manufacturers bin their devices for color, brightness, and
forward voltage. Binning for all three characteristics is
expensive, and forward voltage is often the specification that
is allowed to vary the most. Adding this to the shift in forward
voltage as the LED die temperature changes gives rise to the
need for constant-current regulators that have a wide range of
output voltage.
Constant
LED lighting financing
Financing
Leasing Lighting Equipment
Are you a concert touring and lighting company who just landed the HUGE concert tour of the summer?
Need to finance the latest in automated lighting, stage lighting, fog machines, follow spots, studio lighting and more?
WB Financial is home to the most complete lighting equipment leasing options available in the US and Canada.
WB Financial is able to provide the equipment financing our clients need to grow their business.
Contact your Financial account manager to see how we can help your business:
WB is an industry leader in lighting equipment leasing; allow us to structure an equipment financing package to meet your needs today. "Distinctively Different Business Finance" |
Friday, March 26, 2010
| American Green Energy Council iLinear™ R60 LED Ribbon Flex Strip | |||||||||
| Item Id: 60 | |||||||||
| |||||||||
| |||||||||
 | |||||||||
| |||||||||
| |||||||||
| Description | |||||||||
| |||||||||
| |||||||||
| |||||||||
| |||||||||
LED Product Detail
| Product Detail | ||||||||
| | ||||||||
 Intelligent LED Lighting Systems for indoor and outdoor lighting applications: LED screens displays for advertising, LED strips and modules for signage lighting, LED border lights and rope lights for architectural lighting, LED illumination lights for halogen replacement and complete power/control solutions.
|
About
| About |
| |
 ATG LED LIGHTING Technology is a leading provider of innovative products for both global and domestic markets, including imaging products, enclosures, power supplies and LEDs . See Your Community in a Better Light Energy to operate street lights accounts for the majority of your operating budget. Why not let your street lights work for you to reduce energy and maintenance costs while creating jobs within your community. Easily retrofit to existing mounting systems, AGEC streetlights will also improve visibility, safety, and dependability creating a better environment for the entire community. * Reduce Your Cost * Create More Jobs * Increase Safety * Improve Service to Residents * Retrofit to a New Look Reduce Your Cost A lower total cost of ownership allows you to be flexible with your operating or capital expenses. With a typical energy savings of 40 to 60% , near zero maintenance costs, and fast payback help to free up funds for other high priority projects. AGEC Installations Create More Jobs Supply chain experts determined for every 100,000 units,AGEC and its suppliers would create approximately 227 jobs throughout the U.S. not to mention the jobs created to install each batch of AGEC streetlights in local communities. AGEC delivers higher quality light for improved color rendition and visibility. Patented technology delivers greater uniformity, eliminating dark spots between fixtures that help to create a safer environment for vehicle and pedestrian traffic. Improve Service to Residents It's predicted each AGEC streetlight will deliver more than 15 years of reliable service. With increased system reliability and significantly less outages, residents can enjoy uninterrupted service and a safer environment. Show the world your community is environmentally conscious and leading the charge to reduce energy demand and greenhouse gas emissions. LED technology helps you set the example, achieve sustainability goals and improve your community’s quality of life. HID vs. LED Retrofit to a New Look If retrofitting makes financial sense,AGEC can be installed onto existing mounting systems to replace traditional streetlights. AGEC streetlights can be installed in a matter of minutes saving your community time and money. |
American Green Energy Council Commercial LED Lighting-teaches Environmental lighting strategies.T8 Fluorescent tubes to LED power supplies and controllers LED Light bulbs,LED light bulb replacement
American Green Energy Council Commercial LED Lighting-teaches Environmental lighting strategies.T8 Fluorescent tubes to LED power supplies and controllers LED Light bulbs,LED light bulb replacementCompanies that develop environmentally sound clean commercial LED lighting strategies, initiatives and programs, are finding new opportunities and value commercial propositions, resulting in brand enrichment, improved regulatory compliance, enhanced visibility to investors and consumers.
Commercial Environmental sustainability encompasses seven dimensions:But first you need to know where your company is now, and where it would like to go with a commitment to action. We can help your company with this process through our unique one on one consultation program "Sustainability How do we get there"
Commercial Environmental sustainability encompasses seven dimensions:But first you need to know where your company is now, and where it would like to go with a commitment to action. We can help your company with this process through our unique one on one consultation program "Sustainability How do we get there"
Unlocking the value in clean commercial LED lighting depends on sustainable operational efficiency, With clean lighting,green buildings and infrastructures, and intelligent ecosystems.We can Reduce mercury pollution from coal plants and will pay health and economic dividends for years to come Further, by systematically managing clean commercial LED lighting and energy use, as well as greenhouse gas emissions, smart organizations can realize true sustainability while achieving real business benefits – While driving down cost and driving growth at the individual, organizational and population levels. We must all work together to drive real progress in our world – to become commercial clean LED lighting green and beyond. Conscious Capitalism is based on the triple bottom line of people, planet and profit. Seth Godin reminds us today that it’s also about integrity. It’s not enough for integrity to be part of the personality of your business. Integrity must be a part of its essence. Integrity is a Choice Systems are always going to be manipulated by some. That’s inevitable. What’s happening today is that manipulation has become part of the system. How unfortunate it is that the people that choose not to manipulate are the ones going against the grain. Integrity is going against the grain. How sad is that? .We don’t have to play the game, we can, we should, we must create a new game. Integrity is a choice. It’s not an easy choice. Conscious Capitalism is about making conscious choices. *** Thank you Andrea for such an appropriate post…
Our unique one on one consultation Whether you are a small or large corporation, our easy-to-use business Web conferencing solutions can save all of us energy time and money on travel while increasing productivity, and product knowledge presentations American green energy council provides “Turn-Key” energy and carbon reduction lighting solutions. Whether you own a, business, or chain of them - we can help you take control of your lighting energy needs. By utilizing all available options(efficiency, conservation, renewable), we provide the most comprehensive and cost-effective solutions for our clients’ needs. We believe the best strategy for achieving clean commercial lighting energy and carbon reduction is unique for each client. Through a highly customized and interactive approach, we develop solutions that minimize or eliminate waste, capitalize on all available state and federal rebates and tax incentives, and reduce total energy costs. |
Subscribe to:
Posts (Atom)
Posts
